Blinky Track
Click above to see movie
PIRA Classification: 1C20.40
Description: The blinky track consists of two sections: one at a
specific angle and the other that is level. Along the track, LEDs blink
and a buzzer buzzes once a second. When a ball is released, it rolls past
each LED as they blink. The LEDs on the incline are unevenly spaced while
the LEDs along the level section are evenly spaced.
Special Instructions: When the ball is released by raising the
starting gate, a switch is
pushed, starting the LEDs and buzzer for 8 seconds. The buzzer can be
turned off using the switch next to it.
Ideally For: Phys 1101, 1201, 1301, 1401
Condition: Good
Setup time: 5 minutes.
Safety Issues: None